STEP 1
Turn Extender ON
Turn ON Extender by holding the push button for 2 seconds, the status LED will turn green.
STEP 2
Turn ON Headset
Turn on the headset and pair it to a dongle (USB Receiver) or BLE device.
STEP 3
Plug to a Headset
Plug the headset into the headset USB port of Extender using a supplied headset charge cable.
The headset will disconnect momentarily and should re-connect, if it doesn’t the firmware of your headset might be out of date. The status LED will turn orange and the charge LEDs on the head should also show orange.