How to quickly set up the headset?
We recommend that you use a polystyrene head when setting up the cap to make the setup easier.
- Remove the cap, electrode trees and controller from the packaging.
-
Fit the controller to the cap with the Emotiv logo.
-
Fit the blue wire tree into the left side of the controller and the red wire tree into the right side.
-
Starting with LA position your sensors into the cap, we recommend that you try to keep left and right as a mirror image to make setup simple. See our example layout above.
-
The cap is now ready for fitting onto the test subject.
-
Please plug in the universal USB receiver into your computer and ensure the power switch is to the right a blue LED will turn on indicating power on. You should also see the lights on the receiver change to indicate it is receiving data.